Foco Two 800 Medium built-in bioethanol fireplace
Foco Two 800 Medium is a 2-sided bioethanol fireplace on 80 cm in the width. The fireplace is designed to be built into a wall, where the flames can be seen from the front. Although the name of the fireplace can be a bit confusing, it is actually very simple.
This fireplace is a part of our fireplace-series called Foco, which are budget friendly bioethanol fireplaces for built-in.
Two means, that it is a 2-sided bioethanol fireplace. So it is possible, to see the flames from 2 sides.
800 is the width on the fireplace in millimetres
Medium refers to the depth on the fireplace. In the medium version, has the Foco fireplace a depth on 30 cm. Which means, that this fireplace requires a wall on 30 cm deep.
For the Foco Two 800 Medium you get a manual burner. See the specifications for the burner here:
You can also get the Two 800 Medium with an automatic burner. See the Foco Two 800 Medium with automatic burner.
Foco Two Medium is made of 4 mm thick stainless steel, which has been powder coated black. This gives the bioethanol fireplace a neutral and timeless design, that lets the flames be in focus.
Further more includes Foco Two 2 tempered glass, as must be placed on each sides in front of the flames. In addition to, that the glass looks great, then it will also shield the flames from draft and small gusts of wind, which helps to provide a more stable flame. However, it is possible not to mount the glass, if desired.
The Foco fireplaces have a variety of accessories available as a supplemental purchase. These range from general accessories and decorations to exclusive Foco accessories designed to help conceal screws and transition from wall to fireplace.
The package includes
- Bioethanol burner
- Foco Two 800 Medium frame - assembled from the factory
- 2x tempered glass (Height 10 cm)
- 4x glass holders
Installation of Foco Two Medium
The installation of a Foco Two Medium is relatively easy, if you have a little bit technical knowledge and it requires no special certification. You can therefore do the installation by yourself.
The frame is delivered assembled from the factory and is therefore ready to be installed in the wall, when you receive it.
If you mount the fireplace into a flammable wall, you must heat-insulate between the fireplace and the wall. For this, we recommend that you use materials as Skamotec fire boards, Fermacell fire boards or high temperature plasterboards.
It can be a little difficult to get a perfect edge around the fireplace when built into an existing wall. We have therefore made an outer frame, which is placed on the outside of the fireplace to hide any imperfections. Note, however, that this is an acquisition and must be actively selected.