XL Wall-Mounted Fireplace in Black
Wall-mounted bio fireplace in black with 3 burners. The fireplace is equipped with a safety glass that provides protection for the flames against drafts and gusts of wind.
The XL fireplace doesn't require a chimney or exhaust. However, a minimum room size of 120 m3 is recommended. It's essential to adhere to this requirement since the fireplace will use oxygen from the room during operation. An oversized fireplace might consume too much oxygen, leading to a stuffy atmosphere.
The fireplace comes with 3 x 1 liter manual bioethanol burners. The burners are positioned in a row inside the fireplace, providing 3 independent flames, each 18 cm wide.
With one refill of bioethanol, each burner can burn for approximately 5 hours and 15 minutes, though this may vary depending on wind and drafts.
Heat Output and Consumption
Each of the 3 burners has a consumption rate of approximately 0.18 liters of bioethanol per hour and an output of 1.32 kW of heat.
When all burners are lit, the total consumption is about 0.54 liters of bioethanol per hour, providing a heat output of 3.96 kW. This can be compared to a traditional wood-burning stove, which typically emits around 6 kW of heat.
The 3 burners are also adjustable, allowing you to control the size of the flames, and consequently, the consumption and heat output.
- Wall-mounted bio fireplace
- 3 x 1.0-liter manual bioethanol burners
- Safety glass and mounting brackets
- Adjustment and installation tools
- Mounting brackets
Mounting and Installation
This bio fireplace can easily be mounted on all types of walls using the included brackets. The brackets create a small gap between the fireplace and the wall, preventing direct heat transfer to the wall.
The installation process for this bio fireplace is very similar to installing a TV.
The wall should be able to support the weight of the fireplace, which is 29 kg. In some cases, you may need to use wall anchors (rawplugs).