Foco One 1000

Foco One 1000 - single-sided bio fireplace for installation

Foco One 1000 is a bioethanol fireplace for installation in the wall with an open side. Therefore, it allows you to see the flames from one side.

Bioethanol burner

It is possible to choose between 5 different bioethanol fire vessels for Foco One:

• Superior manual 800 - up to 6.5 hours burning time on a full fill
• Automatic firebox 700 - up to 15 hours burning time on a full fill
• Planika PrimeFire 700 - up to 7 hours burning time on a full fill
  
• Fire Line Automatic 3 - up to 10 hours burning time on a full fill
• Fire Line Automatic 3XL - up to 32 hours burning time on a full fill

The automatic burners allow you to switch the fire vessel on and off with a remote control. They also have several extra safety functions that can automatically extinguish the fire. But be aware that the automatic burners must be connected to a power source.

Materials

Foco One is made of 4 mm thick stainless steel, which has been powder-coated black. This gives the bio fireplace a neutral and timeless design that lets the flames be in focus. In addition, tempered glass is included, which is set up in front of the flame. In addition to the glass looking nice, it shields the flames from drafts and small gusts of wind and therefore helps to give a more stable flame. However, it is possible to choose not to mount the glass if you wish.

The package includes:

• Manual or automatic bioethanol firebox
• Foco One frame in five parts
• Screws and nuts to assemble the frame
• 1x tempered glass (Height 10 cm)
• 2x holders for glass
• Installing Foco One

The installation of Foco One is relatively easy if you have a little technical ingenuity, and does not require any special certification. You are therefore welcome to carry out the installation yourself. If you build the fireplace into a flammable wall, you should heat insulate between the fireplace and the wall. For this, we recommend heat-insulating boards such as Skamotec firewall plates, fermacell boards, or fire plaster.

It can be a little difficult to get a perfect edge on the fireplace when built into an existing wall. We have therefore made an outer frame, which is placed on the outside of the fireplace to hide any imperfections. Note, however, that this is an acquisition and must be actively selected  or similar.